Modify Edges on 3D Solids

Up a level to ..

Modify Edges on 3D Solids

 

AutoCAD 2008 User's Guide > Work with 3D Models > Modify 3D Solids and Surfaces > Select and Modify 3D Subobjects > Modify Edges on 3D Solids > 

Modify Edges on 3D Solids

Concept

Procedure

Quick Reference

To change the color of an edge on a solid object

1. Press and hold CTRL.
2. Click an edge on a 3D solid.
3. If the Properties palette is not displayed, click Tools Palettes Properties.
4. In the Properties palette, under General, click Color.

   An arrow is displayed in the right column.

5. Click the arrow and select a color from the list or click Select Color to display the Select Color dialog box. If you click Select Color, do one of the following:
   • On the Index tab, click a color or enter the ACI color number (1-255) or name in the Color box.
   • On the True Color tab, select the HSL color model in the Color Model option and specify a color by entering a color value in the Color box or by specifying values in the Hue, Saturation, and Luminance boxes. Click OK.
   • On the True Color tab, select the RGB color model in the Color Model box. Specify a color by entering a color value in the Color box or by specifying values in the Red, Green, and Blue boxes.
   • On the Color Books tab, select a color book from the Color Book box, select a color by navigating the color book (using the up and down arrows) and clicking on a color chip. Click OK.
    Command entry: PROPERTIES