AutoCAD 2008 User's Guide > Work with 3D Models > Modify 3D Solids and Surfaces > Select and Modify 3D Subobjects > Modify Edges on 3D Solids > 
Modify Edges on 3D Solids
Concept Procedure Quick Reference
 
 
 

To chamfer an 3D solid object

  1. Click Modify Chamfer.At the Command prompt, enter chamfer.
  2. Select the edge of the base surface to chamfer (1).

    One of two surfaces adjacent to the selected edge is highlighted.

  3. To select a different surface, enter n (Next), or press ENTER to use the current surface.
  4. Specify the base surface distance.

    The base surface distance is measured from the selected edge to a point on the base surface. The other surface distance is measured from the selected edge to a point on the adjacent surface.

  5. Specify the adjacent surface distance.

    Loop selects all edges around the base surface and Select Edge selects individual edges.

  6. Specify the edges to chamfer (2).

 Command entry: CHAMFER