Use a Stretch Action in a Dynamic Block

Up a level to ..

Use a Stretch Action in a Dynamic Block

 

AutoCAD 2008 User's Guide > Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Add Dynamic Elements to Blocks > Use Actions with Dynamic Blocks > Use a Stretch Action in a Dynamic Block > 

Use a Stretch Action in a Dynamic Block

Concept

Procedure

Quick Reference

To add a stretch action to a block definition

1. In the Block Editor, in the Block Authoring Palettes window, Actions tab, click the Stretch Action tool.
2. In the Block Editor drawing area, select a parameter to associate with the action. (You can associate the following parameter types with a move action: point, linear, polar, and XY.)

   If you associated the stretch action with a point parameter, go to step 4.

3. Do one of the following to select a parameter point to associate with the action:
   • Use the pointing device.
   • Follow the command prompts.
4. Do one of the following to specify the first corner of the stretch frame:
   • Use the pointing device.
   • Enter the X and Y coordinate values, separated by a comma.
5. Do one of the following to specify the opposite corner of the stretch frame:
   • Use the pointing device.
   • Enter the X and Y coordinate values, separated by a comma.
6. Select the objects for the selection set.
7. Press ENTER.
8. (Optional) Follow the command prompts to specify a distance multiplier and angle offset.
9. Do one of the following to specify the location of the action:
   • Use the pointing device.
   • Enter the X and Y coordinate values, separated by a comma.
     NoteThe action location in the block definition has no effect on the appearance or the functionality of the block reference.
10. On the Block Editor toolbar, click Save Block Definition.
11. If you are finished using the Block Editor, click Close Block Editor.

 Toolbar: Block Editor 

 Command entry: BACTION